Cheapest Continuous oil filtration equipment Features and working principle
multi-layer stainless steel mesh filtration and composite polymer adsorption combined with deep, high precision DFH double rectangular filtration system, super pollution capacity, high filtration accuracy.
Cheapest Continuous oil filtration equipment Mainly used for processing and regeneration of unqualified hydraulic oil, lubricating oil, refrigerating oil, anti-wear hydraulic oil, heat conduction oil, quenching oil, cleaning oil, anti-rust oil and other high-precision oil (phosphoric acid anti-oil is made of stainless steel).
Cheapest Continuous oil filtration equipment The characteristics of
1, multi-layer stainless steel mesh filtration and composite polymer adsorption combined with deep, high precision DFH double rectangular filtration system, super pollution capacity, high filtration accuracy.
2, the use of strong magnetic filter material, can effectively remove metal impurities such as iron filings; The original imported polymeric polymer material is used to completely break the emulsification; The combination of coalescence separation and vacuum complex three dimensional flash evaporation makes dehydration and degassing faster and more complete.
3, multi U-shaped gradually denser carbon cellulose far infrared heater, efficient, uniform heating, energy saving and consumption reduction; Pure physical filtration, do not harm the essence of oil and various additives; Strong wind cooling technology makes water and steam condense and precipitate quickly, and protects vacuum pump.
4. The infrared level controller is used to automatically control the amount of oil in and out of the equipment to ensure the balance of oil in and out.
Cheapest Continuous oil filtration equipment The working principle of
Cheapest Continuous oil filtration equipment When working, the contaminated oil enters the heater through the inlet under the action of atmospheric vacuum suction. After heating, the oil enters the primary filter, and the large particles and impurities are filtered out. Then the oil enters the water separator and vacuum separator and flows through the special divergent device.
Cheapest Continuous oil filtration equipment The divergent device produces a large surface area for each volume of oil and exposes the contaminated oil to a vacuum with very low relative humidity, thus removing water, air and gases from the oil. The mixture of evaporated water vapor and gas condenses into liquid through the tank and cooler, and enters the water storage device together. The remaining gas is extracted by the vacuum pump. The dehydrated oil is fed into a fine filter by the discharge pump to remove particulate impurities, which is called purified oil. A purification process is completed. According to the amount of water content, it must be recycled several times before the water is completely removed.