搜索
Search

LATEST NEWS:

News categories

CONTACT US:

Yantai Hairui Foods Equipment Co., Ltd.
Add.:

NO.52 Xiamen Street,Guxian Economic&Technological Development Zone, Yantai City
Contact: Mr. Zhang Jian
Tel: +86-535-6836326   +86-13853508618

Fax: +86-535-6763595
Email: vacuumfryer2008@gmail.com
Website: http://www.vacuumfryer.net
Post Code: 264000

/
/
/
Do you know what the debugging method of Best Dryer supplier china is?

Do you know what the debugging method of Best Dryer supplier china is?

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-04-02 11:55
  • Views:

(Summary description)Before commissioning, we need to close the door of the Best Dryer supplier china box, tighten the door handle, then close the air release valve and open the vacuum valve. Of course, the switch of the vacuum valve may be tight for one use and it can be rotated forcefully.

Do you know what the debugging method of Best Dryer supplier china is?

(Summary description)Before commissioning, we need to close the door of the Best Dryer supplier china box, tighten the door handle, then close the air release valve and open the vacuum valve. Of course, the switch of the vacuum valve may be tight for one use and it can be rotated forcefully.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-04-02 11:55
  • Views:
Information

Do you know what the debugging method of Best Dryer supplier china is? Let’s take a look at it with the editor below!
1. Vacuum debugging method
Before commissioning, we need to close the door of the Best Dryer supplier china box, tighten the door handle, then close the air release valve and open the vacuum valve. Of course, the switch of the vacuum valve may be tight for one use and it can be rotated forcefully. We can use the attached accessories to connect the vacuum pipe, firmly connect the vacuum drying suction pipe and the vacuum pump. When the vacuum pump power is turned on, it is necessary to start pumping. When the indication value of the vacuum gauge reaches -0.1Mpa, the vacuum valve must be closed first, and then the vacuum pump power supply is turned off to prevent the oil in the vacuum pump from flowing back into the working chamber. The inside of the dryer is in a vacuum state.
2. In-machine debugging method
First turn on the power of the vacuum dryer, then its power light will light up and perform a self-check, and then it will indicate that it has entered the state at this time. Set the temperature of Best Dryer supplier china. When the temperature in the set machine is close to the specified temperature, the heating starts to enter the PID adjustment stage. It is normal that the measured temperature of the instrument exceeds the set temperature and the elongation is also lower than the set temperature. Therefore, if the temperature is already close to or equal to the set temperature when measuring the temperature, it can almost enter a constant temperature state after another 1-2 hours. If the required temperature is relatively low, we can use the second setting method to let it enter the constant temperature state as soon as possible.
In summary, the editor introduces Best Dryer supplier china's debugging method knowledge, I hope you can learn more.

Keyword:

Scan the QR code to read on your phone

Copyright Reserved:Yantai HaiRui Foods Equipment Co., Ltd.     Address:NO.52 Xiamen Street, Guxian Economic&Technological Development Zone, Yantai City,China    
E-mail: 
vacuumfryer2008@gmail.com  Tel:+86-535-6836326   +86- 13853508618     Fax:+86-535-6763595    
鲁ICP备13001607-1   Powered By: 300.cn

language
中国
韩国
韩国
韩国
韩国
韩国

Hairui Foods